Need help?Do you have a question about the chilisleep OOLER and is the answer not in the manual?
Lay out the Hydronic Pad beneath the fitted sheet on your mattress.
Place the Ooler control unit on a flat, clear surface with 18-inch radius.
Connect the Hydronic Pad tubing to the Control Unit; it should click.
Plug the Ooler into a power cord and then into a wall outlet.
Fill the control unit with 1 quart (950ml) of water and press the power button.
Use a dense blanket or comforter over the body for insulation and temperature.
Find and download the Ooler app from the App Store or Google Play.
Follow app instructions to pair the Control Unit with your phone or tablet via Bluetooth.
Set mattress temp (55°-100°F), adjust noise, and control system remotely.
Setup daily schedules for custom temperature changes during sleep.
Use gentle warming as an alarm to trigger the body's natural wake response.
Includes bedtime reminders, low water notifications, and fan speed settings.
The OOLER Sleep System is a temperature-controlled mattress pad designed to enhance sleep quality by regulating the temperature of your bed. This system consists of a Hydronic Pad, which is placed directly beneath your fitted sheet, and an OOLER Control Unit, which circulates temperature-controlled water through the pad. The system offers a range of features to customize your sleep environment, all managed through a dedicated mobile application.
The primary function of the OOLER Sleep System is to provide precise temperature control for your mattress. By circulating water through the Hydronic Pad, the system can heat or cool your bed to a desired temperature, ranging from 55°F to 100°F (13°C to 43°C). This allows users to create an optimal thermal environment for sleep, whether they prefer a warm bed to fall asleep in or a cool surface throughout the night. The system is designed to maintain a consistent temperature, adapting to your preferences to promote deeper, more restorative sleep.
The OOLER Sleep System is designed for ease of use, with several features that allow for personalized control and scheduling:
State-of-the-Art Temperature Control: Users can set their desired mattress temperature within the specified range directly from the OOLER app. The app also allows for turning the OOLER system on and off, adjusting white noise levels, and changing the temperature with ease from your bed. This precise control ensures that your sleep environment is always at your preferred temperature.
Custom Sleep Schedules: One of the key features is the ability to create daily sleep schedules. This allows users to program custom temperature changes throughout the night. For example, you can set the system to warm your bed as you get in, cool it down during the core sleep hours, and then gradually increase or decrease temperatures as you sleep, optimizing for different sleep stages or personal comfort.
Warm Awake Feature: The OOLER system includes a "Warm Awake" feature that functions as an alarm clock replacement. Instead of a jarring sound, this feature gently warms the mattress temperature to trigger your body's natural wake response. This gradual warming helps users wake up feeling more refreshed and less groggy, mimicking the natural process of waking with the sun.
White Noise Control: The OOLER Control Unit incorporates white noise functionality. Users can adjust the white noise level through the app, helping to mask disruptive sounds and create a more tranquil sleep environment. This feature can be particularly beneficial for those who live in noisy areas or have trouble falling asleep due to ambient sounds.
Fan Speed Modes: The system offers different fan speed modes—Silent, Regular, and Boost—allowing users to balance cooling/heating performance with noise levels. For those who prioritize a quiet environment, the Silent mode minimizes operational sounds. When more aggressive temperature changes are needed, the Regular or Boost modes can be engaged.
Dual Zone Capability (for specific models): While not explicitly detailed for all models, the mention of "dual zone Hydronic Pad straps" suggests that some OOLER systems may offer dual-zone temperature control. This would allow two individuals sharing a bed to set independent temperature preferences for their respective sides, catering to different comfort needs without compromise.
Mobile App Control: The entire system is managed through the OOLER app, available on both the App Store and Google Play. The app serves as the central hub for all controls, from setting temperatures and schedules to monitoring system status. This remote control capability provides convenience and flexibility, allowing users to adjust their sleep environment without having to physically interact with the control unit.
Bedtime Reminders: The app is equipped with bedtime reminders, a helpful feature for establishing a consistent sleep routine. These reminders can prompt users to start winding down for the night, contributing to better sleep hygiene.
The OOLER Sleep System is designed with user-friendly maintenance in mind, primarily focusing on water management:
Water Filling and Refill Indicators: The system requires water to operate, which is filled into the Control Unit. The initial fill requires approximately 1 quart (950ml) of water. The system will circulate this water into the Hydronic Pad. A key maintenance feature is the low water indicator light. This light turns off once the Hydronic Pad has filled with water, signaling that the system has enough water for operation. Users are instructed to refill the unit if the low water indicator light comes on, ensuring continuous performance.
Low Water Notifications: In addition to the indicator light, the OOLER app provides low water notifications. These digital alerts inform users when the water level in the Control Unit is low, prompting them to refill it. This proactive notification system helps prevent interruptions in service and ensures the system operates efficiently.
Optimal Performance Guidelines: For optimal performance, the guide recommends placing a dense blanket or comforter over your body when the OOLER Sleep System is in use. This provides the needed insulation to achieve and maintain your desired temperature more effectively, which can also contribute to the longevity and efficiency of the unit by reducing the workload on the system.
In summary, the OOLER Sleep System is a comprehensive solution for personalized sleep temperature control. Its combination of a temperature-regulating mattress pad, a smart control unit, and an intuitive mobile app offers a sophisticated yet easy-to-use system for improving sleep quality through environmental optimization. The focus on customizable schedules, gentle wake-up alarms, and convenient maintenance features makes it a valuable tool for anyone looking to enhance their sleep experience.
General| Product Category | Personal Care Products |
|---|---|
| Product Name | chilisleep OOLER |
| Product Type | Sleep System |
| Connectivity | Wi-Fi |
| Power Consumption | 80W |
| Noise Level | Quiet operation |
| Warranty | 2-year limited warranty |
| Temperature Range | 55°F to 110°F (13°C to 43°C) |
| Control Method | App |
| Compatibility | Mattresses |
| Power Supply | AC 100-240V |
To Next Page