Inverter heat pump solution
The WARNING sign denotes a hazard. It calls attention to a procedure,
practice, or the like, which, if not correctly performed or adhered to, could
result in personal injury or injury to a third party. These signs are rare, but
are extremely important.
a. Keep the heat pump away from fire source.
b. It must be placed in well ventilated area, indoor or closed area is not allowed.
c. Repair and disposal must be carried out by trained service personnel
d. Vacuumize completely before welding. Welding can only be carried out by
professional personnel in service center.
2. Attention
a. Please read the following instructions before installation, use and maintenance.
b. Installation must be done by professional staff only in accordance with this manual.
c. A leakage test must be performed after installation.
d. Please don’t stack substances, which will block air flow near inlet or outlet area, otherwise the
efficiency of the heat pump will be reduced or even stopped.
e. Set proper temperature in order to get comfortable water temperature to avoid overheating or
overcooling.
f. In order to optimize the heating effect, please install heat preservation insulation on pipes between
To Next Page
Loading...