ChinaPST PST-ADO500 - User Manual

2 Wire Audio Door Phone System
PST-ADO500
User Manual
---------------------------------------------------------------------------------------
Please read this user guide carefully before using this product

Summary

Decoder Port Code Value Setup and Jumper Method

Room Number Setting

Manually Set Room Number

Configure room numbers via outdoor station password entry and direct input.

Automatically Set Room Number

Use passwords to enable automatic room number assignment based on household count.

User Password Unlock Settings

Set and Modify Unlock Password

Learn how to set or change the unlock password via the indoor phone and host.

Password Unlock Operation Method

Unlock the electronic lock using the outdoor station with a 4-digit password.

Host Operating Instructions and Volume Adjustment

Host Call Operation

Manage calls, unlock doors, and handle input errors on the host.

Host Volume Adjustment

Adjust speaker, ring tone, and microphone volumes using VR controls.

ID Card Operation

Set Admin Cards

Configure admin cards by setting switches and powering on the system.

Add User Cards

Add new user cards via standby mode or using a dedicated 'Add Card'.

Delete User Cards

Remove user cards using a 'Delete Card' or via standby mode selection.

System Fault Type Display

Extension Operation Instructions

Receive Host Call and DND

Answer calls from the host and activate the 'Do Not Disturb' function.

Wiring Requirements

System Connection Wiring Diagram

ChinaPST PST-ADO500 Specifications

General

Brand	ChinaPST
Model	PST-ADO500
Category	Intercom System
Language	English