Need help?Do you have a question about the ChinaPST PST-G10A and is the answer not in the manual?
General| Category | Security System |
|---|---|
| Model | PST-G10A |
| Manufacturer | ChinaPST |
| Wireless Frequency | 433MHz |
| Wireless Transmission Distance | 100m (Open Area) |
| Alarm Siren Sound Level | 110dB |
| Operating Temperature | -10°C to 50°C |
| Humidity | 40% to 80% RH |
| Battery Standby Time | ≥8h |
Details safe voltage, adapter use, and environmental conditions to avoid damage and ensure proper operation.
Covers using professional tools, optimal panel placement, password security, and intercom best practices.
Highlights Smart Phone APP, zone management, voice recording, ADMECO protocol, and communication options.
Explains timely arm/disarm, remote monitoring, zone programming, voice prompts, and battery backup features.
Describes the functions of the digital display, buttons (Set, SOS), and status lights (Arm, GSM).
Details the SIM slot, power adapter interface, data interface, and internal battery power switch.
Explains connections for wired sirens and sensors, including polarity and voltage cautions.
Provides four methods to arm the alarm system: via remote control, APP, SMS message, or phone call.
Outlines four methods to disarm the alarm system: using remote control, APP, SMS, or phone call.
Explains how to activate Home Arm mode using a remote control or the mobile application.
Details how to activate the SOS alarm immediately using the remote control button.
Describes how to check the current status of the alarm system via the APP or SMS.
Guides on using the intercom function through the APP or by calling the system host.
Explains how to interact with the system when it calls, using keypad commands to control functions.
Details how to control the system remotely via phone, using keypad commands for various functions.
Instructions for adding new remote controls and deleting existing ones from the system.
Guides on how to add wireless detectors and remove them from the alarm system.
Details the optional configuration for enabling and adding wireless sirens to the system.
Covers setting zone names, voice recordings, alarm addresses, and zone attributes like mode and location.
Instructions for changing operation and programming passwords, and configuring CID protocol parameters.
Guides on setting up phone numbers for receiving calls and SMS numbers for alerts.
Details settings for arm delay time, alarm delay time, and alarming siren duration.
Configures remote arm delay, siren prompts for arm/disarm, SOS siren behavior, and SMS notifications.
Covers key beep settings, SMS alerts for power failures, and system date/time configuration.
Instructions for setting up automatic arming and disarming schedules for the system.
Step-by-step guide on how to reset the system to its original factory settings.
Presents a table of the system's default values for defense zones, passwords, and alarm duration.
To Next Page