Fig.
10
14,
Operate film advance lever, depressing
shutter release until figure
"
1
"
is lined up
in the exposure counter window. In this
position the camera is ready for the first
exposure to be made
'Fig.
101.
To be certain that the film transports cor-
rectly, take up any film slack in the cassette
by turning the re-wind crank clockwise till
resistance is felt. When advancing the film
the rewind knob should turn anticlockwise.
This is evidence that the film is loaded
correctly.
If
it
does not, start loading
again.
6
SETTING
FILM
SPEED (ASA'DIN)
The ASA lor DIN1 speed of the f~lm is specified
on the film box or in the instruction sheet
packed with the film.
Pull up and rotate the outer rim of the shutter
dial until desired ASA
IDIN) number of the film
shutter speed dial
(Fig.
11
r.
Also rotate film type indicator dial so that the
film type inserted shows to its pointer Fig.
12).
This will remind you of the type of film you
are using.
To Next Page
Loading...
