3
ASSEMBLY INSTRUCTIONS AND FUNCTIONS
This stroller is supplied partially assembled. In order to complete the assembly, you do not need any
tools.
The assembly, disassembly and functions are numbered from 1 to 10. Use the operations descriptions
given in this manual and their matching picture.
1 – ASSEMBLY AND REMOVAL OF THE FRONT WHEELS
Toremovethefrontwheels,pressthereleasingbuttonlocatedinsidethexingmechanism.
2 – ASSEMBLY AND REMOVAL OF THE REAR WHEELS
Toremovetherearwheels,pressthebuttonlocatedatdownsideofxingmechanism.
3 – UNFOLDING THE STROLLER
3-1–Releasethexing;
3-2 – Fixing the stroller in open position;
3-3 – Assembly and removal of canopy.
4 – ATTACHMENT AND REMOVAL OF FRONT BUMPER
To remove the front bumper, press the buttons inside the front bumper.
5 - UNFOLDING OF CANOPY
Push with the hand to fold the canopy. Pull with the hand the canopy to open it.
6 – LEG REST
Lestrestisadjustableintwopositions.Presssimultaneouslybothslidersandpushdownthelegrest.
To upright the leg rest, pull upwards the leg rest until you hear a click sound!
7 – BACKREST ADJUSTMENT
CAUTION! BABIES AGED LESS THAN 6 MONTHS MUST BE PLACED IN STROLLER ONLY WHEN
THE BACKREST IS IN MOST LYING POSITION!
Press the mechanism and set it upwards/downwards to reach the required position!
8 – PARKING DEVICES
IMPORTANT! Always apply the parking devices while stroller is not in motion to avoid sudden sliding
andinjuries!
9 – RESTRAINT SYSTEM (SAFETY HARNESS)
CAUTION! Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
CAUTION!Adjustthebeltssothattheytwellthechildandarenottwisted.
10 – FOLDING THE STROLLER
CAUTION! Before folding the stroller, always activate the parking device, set the stroller in lowest posi-
tion, and empty the storage basket.
CAUTION! Follow exactly the instructions given and check the pictures.
CAUTION! After each operation, make sure that you have followed the instructions correctly and
thexingisstable!
CAUTION! In most cases after the completion of an operation you will hear a clicking sound.