Need help?Do you have a question about the Chisana C1L and is the answer not in the manual?
Assorted sizes of ear tips for a personalized and comfortable fit.
The portable enclosure for storing and charging the earbuds.
The wireless audio devices for listening to music and calls.
USB cable used to recharge the charging case.
Controls playback, calls, and voice assistant functions on the earbuds.
Visual signal for earbud status like pairing and battery.
Displays the current battery charge level of the charging case.
Built-in microphone for voice communication and commands.
The port on the charging case for receiving power.
Guide to automatically power on, pair earbuds, and connect to device.
Earbuds exit pairing mode after 5 minutes if not connected.
Instructions to try all eartip sizes for optimal comfort and listening experience.
How to insert and twist earbuds for a secure and comfortable fit.
Single press of the MFB for basic playback and call management.
Double MFB press for next/previous track selection.
Long MFB press for 3 seconds to increase or decrease volume.
Long MFB press to reject calls, triple press for voice assistant.
Using MFB for play, pause, next, and previous track operations.
Using MFB to manage incoming and outgoing calls.
Handling incoming calls while on an existing call (hold, switch).
Removing protective films before placing earbuds in the charging case.
Placing earbuds in case, closing, and observing LED indicators.
Earbuds' LEDs turn red when charging and off when complete.
Connecting the charging cable to the case's Micro USB port.
Four LEDs on the case indicate charging status.
Audio prompt "Battery Low" occurs every 60 seconds.
Red for charging, off for fully charged, red/blue flashing for pairing.
LEDs indicate battery level from below 25% to 95-100%.
Steps to resolve issues when earbuds are detected but not connecting.
Procedure for resetting earbuds if they don't appear in Bluetooth menu.
Steps to fix no audio output from the left earbud.
How to connect the earbuds to a new device.
Tips for fixing uneven volume between earbuds.
Information on using only the right (master) earbud independently.
Advice to avoid hearing damage by keeping volume moderate.
Warnings against using earbuds in unsafe situations like driving or cycling.
A note that audio might be slightly out of sync with video.
Disconnect USB after charging; use specified chargers to avoid damage.
Product should not be exposed to direct sun for extended periods.
User manual must include FCC statements as per regulations.
Device must not cause harmful interference and must accept received interference.
Measures to correct interference if equipment causes it to radio/TV reception.
Unauthorized changes void user's authority to operate the equipment.
To Next Page
General