To Next PageTo Next Page
Need help?Do you have a question about the Chloride ManageUPS and is the answer not in the manual?
Details the available hardware options for ManageUPS adapters.
Describes the two parts of installation: hardware and configuration.
How SNMP is used for network infrastructure monitoring and management.
How email and WEB are used for UPS alerts and notifications.
Using ManageUPS as a server for UPS status monitoring software.
Manages graceful shutdown of servers during prolonged AC failures.
Key parameters like IP address, MAC address, and DNS for network setup.
Configuring serial and network parameters for adapter setup.
How to configure settings using a web browser interface.
Using a text menu interface via Telnet or serial port for configuration.
Details DHCP client behavior and network settings configuration.
Instructions for configuring static IP settings for the adapter.
Details how ManageUPS maintains and displays event and data log files.
Configuring the messaging service for UPS status events via SNMP Trap or email.
How ManageUPS connects to computers for safe OS shutdown.
Configuring the network time resource (NTP server) for log timestamps.
Configuring SMTP server, port, and message from address for email alerts.
Setting email recipients, severity levels, and message types.
Configuring the SNMP agent to send traps for UPS status events.
Setting destination addresses for SNMP authentication traps.
Configuring authentication schemes for SNMP requests.
Configuring Modbus IP settings for TCP/IP communications.
Default serial communication mode for ManageUPS Net Adapter P-Series.
Information on Modbus registers for UPS identity, measures, and status.
Activating Modbus feature with a license key.
Detailed list of severe UPS conditions and their probable causes.
General