Need help?Do you have a question about the Christie Spyder X80 and is the answer not in the manual?
General| Display type | LCD |
|---|---|
| Product color | Black |
| Built-in display | Yes |
| Scaled resolutions | 4096 x 2400 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| BNC input ports | 1 |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| AC input voltage | 90 - 264 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 1680 W |
Weight and Dimensions| Depth | 598 mm |
|---|---|
| Width | 441 mm |
| Height | 261 mm |
| Weight | 36170 g |
| Package depth | 786 mm |
| Package width | 584 mm |
| Package height | 414 mm |
| Package weight | 49490 g |
Details on using RS232 serial ports for external control commands via Spyder Studio.
Instructions for controlling the Spyder frame via UDP packet on port 11116.
Explains the conventional notations used for commands in the document.
Resizes one or more layers independently horizontally or vertically.
Applies a specified register to one or more layers, useful for recalling data types.
Adjusts aspect ratio offset or sets the total aspect ratio for a layer.
Advances the current script cue by a specified number of steps.
Loads a file as the background of the current or next layer.
Stores the current screen layout to a specified preset ID.
Recalls an existing preset from the frame.
Recalls a single function key defined in Spyder.
Returns all input configuration properties on the specified object.
Sets the horizontal and vertical position of one or more layers.
Assigns an input to an existing input view on a Multiviewer.
Sets the output mode for a specified output (Normal, Multiviewer, Scaled).
Retrieves the current source name and associated source register ID.
Requests the current execution cue of a specified script ID.
Loads the specified test pattern to a specified layer, pixelspace, or output.
Changes the zoom and pan KeyFrame controls on a specified layer.
To Next Page
