SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 1
020-001868-01 Rev. 1 (11-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
This document provides firmware update instructions and describes what is new in this firmware version for
the SUHD983-P.
Learn what has been updated in this release.
Scaler Firmware, v1.0.2.1
• Added RS232 control command for setting OPS/HDMI4 EDID:
• EDU: EDID UHD
• EDF: EDID FHD
• EDI: EDID information
• Resolved the issue where the OPS displayed a black screen.
• Added multi-window configuration in portrait mode.
• Resolved the issue where there was white noise from the panel after a factory reset.
Ethernet Firmware, v11
• Updated the web interface.
• Moved the Multi-window page under Picture settings.
• Added the Preset settings page.
• Added the UHD or FHD OPS/HDMI4 EDID options.
System connection for uploading
1. Plug in a USB memory to the service terminal.