Chrysler 2000 LHS - Page 1270

TRANSAXLE—ASSEMBLY
To install the output bearing cups, use Special Tool
# 5050A.
Fig. 291 Bearing Cup Installation Special Tool
5050A
Fig. 292 Install Piston Retainer Gasket
1 – GASKET HOLES MUST LINE UP
2 – LOW/REVERSE CLUTCH PISTON RETAINER GASKET
Fig. 293 Install Piston Retainer
1 – LOW/REVERSE CLUTCH PISTON RETAINER
2 – GASKET
Fig. 294 Install Retainer Attaching Screws
1 – LOW/REVERSE CLUTCH PISTON RETAINER
2 – SCREWDRIVER
3 – TORX-LOC SCREWS
Fig. 295 Install Low/Reverse Clutch Piston
1 – LOW/REVERSE CLUTCH PISTON
2 – LIP SEAL
3 – LIP SEAL
LH 42LE TRANSAXLE 21 - 101
DISASSEMBLY AND ASSEMBLY (Continued)