EasyManua.ls Logo

Chrysler 300 SRT8 2010 - Bulb Replacement; Low Beam Headlamp, High Beam Headlamp, and Park;Turn Lamp; Tail;Stop, Tail, Turn Signal Lamp, and Backup Lamp

Chrysler 300 SRT8 2010
449 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BULB REPLACEMENT
Low Beam Headlamp, High Beam Headlamp, and
Park/Turn Lamp
High Intensity Discharge Headlamps (HID)
The headlamps are a type of high voltage discharge tube.
High voltage can remain in the circuit even with the
headlight switch off and the key removed. Because of
this, you should not attempt to service a headlamp bulb
yourself. If a headlamp bulb fails, take your vehicle to
an authorized dealer for service.
NOTE: When HID headlamps are turned on, there is a
blue hue to the lamps. This diminishes and becomes
more white after approximately 10 seconds, as the system
charges.
Tail/Stop, Tail, Turn Signal Lamp, and Backup
Lamp
1. Open the trunk.
2. Remove the two fasteners from the back of the tail
lamp assembly.
3. Pull back the trunk liner.
392 MAINTAINING YOUR VEHICLE

Table of Contents

Related product manuals