GETTING TO KNOW YOUR VEHICLE 13
1. Remove the emergency key by sliding the
mechanical latch on the back of the key fob
sideways with your thumb and then pull the
emergency key out with your other hand.
Emergency Key Removal
2. Separate the key fob halves using the tip of
the emergency key, a #2 flat blade screw-
driver, or a coin and gently pry the two
halves of the key fob apart. Make sure not
to damage the seal during removal.
Emergency Key Removal
Separating Case With A Coin
NOTE:
Separating the case can also be done with a key
blade or a flat head screwdriver.
Separating Case With A Key Blade
Separating Case With A Flat Blade Screwdriver
1 — Emergency Key Release Button
2 — Emergency Key
2
20_LX_OM_ENA_GCC_t.book Page 13
To Next Page
Loading...
