258 TECHNICAL SPECIFICATIONS
Engine Oil – 5.7L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA
Material Standard MS-6395, such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler
cap for correct SAE grade.
Engine Oil – 6.4L Engine We recommend you use Pennzoil Ultra 0W-40 engine or equivalent Mopar oil meeting the FCA
Material Standard MS-12633 for use in all operating temperatures.
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For
information on engine oil filler cap location, refer to “Engine Compartment” in “Servicing And
Maintenance” for further information.
Engine Oil Filter We recommend you use Mopar Engine Oil Filters.
Spark Plugs We recommend you use Mopar Spark Plugs.
Fuel Selection – 3.6L Engine Research Octane Number (RON) of 91 or higher.
Fuel Selection – 5.7L Engine Research Octane Number (RON) of 91 Acceptable – Research Octane Number (RON) of 95
Recommended.
Fuel Selection – 6.4L Engine Research Octane Number (RON) of 95 or higher – 98 Research Octane Number (RON) preferred.
Component Fluid, Lubricant, or Genuine Part
20_LX_OM_ENA_GCC_t.book Page 258
To Next Page
Loading...
