Navigation
The route guidance display is automatically shown
when directional announcements are given.
Use the smart speller and the right knob to enter
addresses. The display shows only those letters, num-
bers and symbols that can be used to make a valid
address. Entries are automatically completed. An
empty space between words such as in New York, must
be entered with an underscore
C).
The multifunction keys 1 through 10 may also be used
to select letters, numbers and symbols. Select individ-
ual symbols by pressing the appropriate multifunction
keys under the desired symbol repeatedly until that
symbol appears on the display.
Press the" button to quit the current menu and
return to the previous menu.
The system recalculates a route if a change is made.
58
Repeat the current navigation announcement by press-
ing the left knob.
Adjust the navigation announcement volume by turn-
ing the left knob during a navigation announcement.
Adjust the tone settings by pressing the. button
during the announcement.
Press the left knob to request additional information
during route guidance, or the current position when
route guidance is not active. If the right knob is
pressed during route guidance, WAY ROUTE is dis-
played.
Press the left knob to interrupt the current navigation
announcement.
Turn off announcements by pressing the left knob for
more than 2 seconds during a navigation announce-
ment. Route guidance will only then be shown on the
display. Turn the navigation announcements on by
pressing the left knob again.
To Next Page
Loading...
