JOBNAME: cims CHRY OM French PAGE: 321 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 245AF6BF
/chry_pdm/chrysler/owners/jcd/og
• Towing any trailer will increase
your stopping distance. When tow-
ing, you should allow for addi-
tional space between your vehicle
and the vehicle in front of you.
Failure to do so could result in a
collision.
Towing Requirements – Trailer Lights
and Wiring
Whenever you pull a trailer, regardless of
the trailer size, stoplights and turn signals
on the trailer are required for motoring
safety.
The Trailer Tow Package may include a
four- and seven-pin wiring harness. Use a
factory approved trailer harness and con-
nector.
NOTE:
Do not cut or splice wiring into the
vehicles wiring harness.
The electrical connections are all com-
plete to the vehicle but you must mate the
harness to a trailer connector. Refer to the
following illustrations.
Four-Pin Connector
1 — Female Pins 4 — Park
2 — Male Pin 5 — Left Stop/Turn
3 — Ground 6 — Right Stop/
Turn
art=057003766.tif NO TRANS
STARTING AND OPERATING
321
To Next Page
Loading...
