234 SAFETY
headliner for added convenience to open up
utilization of the storage areas behind the front
seats when the seat is not occupied.
1. Remove the mini-latch plate and regular latch
plate from its stowed position in the headliner
slightly behind the second or third row seat.
Mini-Latch Stowage
2. Grab the mini-latch plate and pull the seat belt
over the seat.
Mini-Latch Plate
3. Route the shoulder belt to the inside of the left
head restraint.
Routing The Rear Seat Belt Latch Plate
4. When the seat belt is long enough to fit, insert
the mini-latch plate into the mini-buckle until
you hear a “click.”
Connect Mini-Latch To Mini-Buckle
1 — Seat Belt Latch Plate
22_RUP_OM_EN_USC_t.book Page 234
To Next Page
Loading...
