Making A Phone Call
Press the “Phone” button.
(After the BEEP), say “dial” (or “call” a name).
Receiving A Call – Accept (And End)
When an incoming call rings or is announced on
Uconnect®, press the Phone button.
To end a call, press the Phone button on steering wheel or
the Phone soft-key on the radio screen.
Mute (Or Unmute) Microphone During Call
During a call, press the “Voice Command” button.
(After the BEEP), say “mute” (or “mute off”).
Transfer Ongoing Call Between Handset And Vehicle
During a call, press the “Voice Command” button.
(After the BEEP), say “transfer call”.
Changing The Volume
Start a dialogue by pressing the “Phone” button , then
adjust the volume during a normal call.
Use the radio VOLUME rotary knob to adjust the volume
to a comfortable level while the Uconnect® system is
speaking. Please note the volume setting for Uconnect®
is different than the audio system.
4
Uconnect® Phone 23
To Next Page
Loading...