Chrysler Sebring Sedan Specifications

4
SEBRING SEDAN
Information is current as of September 1, 2009
www.media.chrysler.com
Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler Sebring Sedan
SPECIFICATIONS
Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Four-door sedan
Assembly Plant
Sterling Heights Assembly, Mich.
Vehicle Class
D-Segment
ENGINE: 2.0-LITER TURBO DIESEL DOHC 16-VALVE
Availability
Available on all Sebring models
Type and Description
Four cylinders in-line, turbocharged, high-pressure, direct injection
Displacement
1968 cu. cm (120.1 cu. in.)
Bore x Stroke
81 x 95.5 mm (3.19 x 3.76)
Valve System
Belt-driven DOHC, 16-valve
Fuel Injection
Electronically controlled, high-pressure direct injection
Construction
Cast-iron block, cast aluminum cylinder head, cast aluminum ladder
frame, forged steel crankshaft
Compression Ratio
18.0:1
Power
103 kW (140 hp DIN) @ 4000 rpm (70.0 hp DIN/L)
Torque
310 N•m (229 lb.-ft.) @ 1750 – 2500 rpm
Max. Engine Speed
5000 rpm (electronically limited)
Fuel Requirement
49 cetane diesel, DIN EN590
Oil Capacity
4.2 L (4.4 qt.) with dry filter
Coolant Capacity
4.0 L (4.2 qt.)
Emission Controls
Oxy-catalyst with integrated Diesel-particulate Filter (DPF) and cooled
Exhaust-gas Recirculation (EGR)
Emission Class
Euro IV
Fuel Consumption
Urban Cycle
8.2 L/100 km (6-mtx); 8.7 L/100 km (DCT)
Ex-urban Cycle
5.1 L/100 km (6-mtx); 5.6 L/100 km (DCT)
Combined Cycle
6.2 L/100 km (6-mtx); 6.8 L/100 km (DCT)
CO2 Emissions
164 g/km (6-mtx); 178 g/km (DCT)

Chrysler Sebring Sedan Specifications

General

Brand	Chrysler
Model	Sebring Sedan
Category	Automobile
Language	English