Need help?Do you have a question about the CIAM CIAO Series and is the answer not in the manual?
General| Brand | CIAM |
|---|---|
| Model | CIAO Series |
| Category | Merchandiser |
| Language | English |
Introduction to the machine and manual.
Instructions for using the machine.
List of norms the cabinet respects.
CIAM spa's disclaimer of responsibility.
CIAM spa reserves the right to update the manual.
Instructions for handling the machine during transport.
Guidelines for storing the display cabinet.
Procedure for removing packaging and checking for damages.
Recommendations for placing the display cabinet.
Guidelines for positioning remote condensing units.
Instructions for connecting piping to remote units.
Instructions for making electrical connections.
Electrical connection for remote condensing units.
Instructions for hydraulic connections (internal units).
Hydraulic connections for remote condensing units.
Important instructions to read before using the manual.
Safety measures to follow when using the instrument.
How the compressor is controlled by the thermostat.
How to activate and use the fast freezing function.
Available defrost modes and settings.
How evaporator fans are controlled.
Functionality and control of the auxiliary output.
Explanation of the function of each LED indicator.
Steps to view the minimum recorded temperature.
Steps to view the maximum recorded temperature.
Procedure to reset stored temperature data.
Steps to view and change the set point.
How to access the PR1 parameter list.
How to access the PR2 parameter list.
Steps to modify parameter values.
Procedure to lock the keyboard.
Procedure to unlock the keyboard.
How to turn the instrument ON/OFF.
Steps to view probe values.
Dimensions and layout for panel mounting.
Instructions for mounting with the keyboard cover down.
Instructions for mounting with the keyboard cover up.
How the generic alarm input works.
How the serious alarm input works.
How the pressure switch input works.
How the start defrost input works.
How to control auxiliary relay via digital input.
How the energy saving function is enabled.
How to turn the instrument ON/OFF remotely.
Details on connecting electrical wiring.
Guidelines for connecting temperature probes.
How digital input polarity is determined.
Information about the TTL serial line connection.
How to download parameters from Hot Key to the instrument.
How to upload parameters from the instrument to the Hot Key.
To Next Page
