CIAT AQUACIAT ILZHE 130Z User Manual


Générateur thermodynamique
Reversible air / water
Notice d’utilisation
User’s brochure
09 - 2003
N 00.117 B
réversible air / eau
Installation
Fonctionnement
Mise en service
Maintenance
thermodynamic generator
Installation
Operation
Commissioning
Maintenance






Betriebsanweisung
ARCHIVE LE 02 / 2007

CIAT AQUACIAT ILZHE 130Z Specifications

General

Brand	CIAT
Model	AQUACIAT ILZHE 130Z
Category	Inverter
Language	English

Summary

Safety Recommendations and Unit Siting

Safety Recommendations

Follow all safety instructions to avoid accidents during installation and operation.

Siting of Unit

Select an appropriate outdoor location for the unit, considering ground support and air circulation.

Circulating Pump and Electrical Systems

Circulating Pump Speed Selection

Electrical Connections and Regulation Devices

Ensure compliance with norms and directives for wiring.

MRS 5.1 Control and Display Module

Understand the functions of the MRS 5.1 microprocessor control unit.

Advanced Control Options and Installation Types

Control Systems and Fault Management

Control of Unit with the MCAD5 Remote Control

Description of Faults Levels

Understand the different fault levels and their implications.

Safety and Regulation Devices

Overview of the unit's safety mechanisms.

Specific Safety Devices

High Pressure Pressostat

B2 Plate Exchanger Antifrost Sensor

Water Flow Controller by FS Differential Pressure

Immersed Electrodes BS Safety Thermostat

Internal Protection of Compressor Motor Assembly

Refrigerant Fluid Sensor/Exchanger B5

Faults and Commissioning Procedures

List of Faults

A comprehensive list of error codes and their meanings.

Verifications Before Commissioning

Perform essential checks before powering up the unit.

Starting Sequence

Follow the procedure for powering and starting the unit.

List of Basic Parameters to be Set

Configure essential parameters for initial operation.

Advanced Parameter Settings

Complementary List of Parameters for Advanced Configuration

Recommendations for Parametering a PCR Installation

Starting the Unit

First Checks

Electrical Characteristics and Troubleshooting

Electrical Characteristics

Trouble Shooting Assistance

Guidance for diagnosing and resolving common issues.