Need help?Do you have a question about the CINEMOOD Storyteller CNMD0016 and is the answer not in the manual?
Hold the Lightning Bolt button for 5 seconds to turn the projector on or off.
Connection port for headphones or other audio devices.
For charging and connecting USB flash drives for content playback. Not compatible with SSD/HDD.
Use the button to adjust focus for the clearest picture; distance affects clarity.
Press to increase functionality and get usage tips.
Use buttons to navigate menus and control playback (volume, rewind, pause).
Used for voice control, functionality available with software update.
Avoid blocking ventilation, direct sunlight, water immersion, disassembly, and eye exposure.
Optimize picture quality by using a dark room and white surface; clean lens if blurred.
Ensure the battery is charged if the CINEMOOD Storyteller does not power on.
Only flash drives are supported for connection; HDD and SSD disks are not compatible.
To Next Page
General