1. Connect the switch to your router using either an Ethernet or SFP cable. Do not connect both to
the router.
2. Connect your laptop or PC to any remaining Ethernet port on the front of the CIS switch
(excluding the console port). You can also access the web interface plugged directly into the
router.
3. To access the web interface, you must obtain the IP address assigned to the switch. Access your
router’s configuration page, then find the IP address assigned to the switch in the DHCP leases.
4. Launch a web browser and navigate to the IP address of the switch. To login, enter the username
cis and password integration.
5. Integrators may use the Get TeamViewer link if remote assistance is required.
To Next Page
Loading...