Cisco MERAKI MS250 Series User Manual

Off Switch does not have power
2 Restore N/A
Restore button to clear switch IP and local configuration
settings
3 Switch Ports Off No link is detected on this port
Solid orange 10/100 Mbps (1 Gbps on SFP+)
Solid green 1 Gbps (10 Gbps on SFP+)
In addition, there is a RESTORE button available on the front panel.
Insert a paperclip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
MS250 Series back panel
Item Function LED Status Meaning
1 Management Interface Green
Connected, used for easy
access to the local status
page
2 Stack Ports
Green
QSFP stacking cable is
connected
3

Cisco MERAKI MS250 Series Specifications

General

Model	MS250 Series
Series	MS250
Form Factor	Rack-mountable
DRAM	2 GB
Flash Memory	4 GB
Input Voltage	100 - 240 VAC
Operating Temperature	0°C to 40°C
Humidity	5% to 95% non-condensing
Ports	24 or 48 Gigabit Ethernet
Uplink Interfaces	4 x 10G SFP+
Switching Capacity	176 Gbps
Forwarding Rate	130.95 Mpps
Power Supply	Internal
Stacking	Yes
Layer	Layer 2 and Layer 3
Product Type	Switch
PoE	PoE+
PoE Budget	740W
Management	Cloud-managed
Storage Temperature	-20°C to 60°C
Warranty	Lifetime hardware warranty