Cisco 3515 MCU12 - Page 42

Index
IN-2
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU24 Releases 5.6 and 5.7
OL-17012-01
H
H.235 1-3
H.239 1-3
H.243 1-4
High Definition 1-4
High Definition Switched Video 1-5
HTTP 2-10
I
initial configuration 2-4
initialization 2-4
installation procedures
access administrator interface 2-14
change advanced configuration settings 2-11
change configuration software password 2-9, 2-10
change IP address 2-9
change LAN port settings 2-11
change password 2-6
change security level 2-10
change unit IP address 2-11
configure default network port values 2-6, 2-9
configure IP address for unit 2-6
configure IP address for video processing module 2-9
configure network security level 2-6, 2-9
configure TFTP server 2-6
configure web server 2-11
configure web server port 2-11
connect to the serial port 2-5
connect unit to the LAN 2-8, 2-12
disable DSP reset 2-11
display Advanced Configuration menu 2-9
display advanced configuration menu 2-6
mount unit in a 19-inch rack 2-3
restore factory configuration 2-11
restore factory settings 2-11
save network configuration settings 2-12
set default network properties 2-9
set duplex parameters 2-7, 2-11
set Ethernet speed 2-7, 2-11
interoperability 1-2
IP address
change for unit 2-11
configure for unit 2-6
configure for video processing module 2-9
IVR 1-4
L
LAN cable 2-3
layouts
Continuous Presence 1-3
LED indicators 2-2, 5-1
local port monitoring 2-13
M
Main menu 2-9, 2-11, 2-12
MC LED See LED indicators
memory 5-1
N
Network Configuration menu 2-6, 2-7, 2-9
O
online help 2-15
operating system 5-1
optional no self see 1-4
P
package contents 2-3
password
change configuration software password 2-10