Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

59-13
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 59 Configuring Active/Standby Failover
Controlling Failover
Step 1 Open Configuration > Device Management > High Availability > Failover.
Step 2 Uncheck the Enable Failover checkbox.
Restoring a Failed Unit
To restore a failed unit to an unfailed state, follow these steps:
Step 1 Open Monitoring > Properties > Failover > Status.
Step 2 Click Reset Failover.

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English