Cisco 7500 Series - Page 171

4-23
Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0
Chapter 4 Performing a Basic Configuration of the System
Using the Flash Memory Cards in the RSPs
Figure 4-2 Installing and Removing a Flash Memory Card (RSP4/4+ and RSP8)
The following sections include additional procedures for using Flash memory and Flash memory cards.
The following procedures are required if you do not plan to use the Flash memory card as it was shipped
to you:
• Formatting a Flash Memory Card, page 4-24
• Copying Files to Flash Memory, page 4-25
• Making a Flash Memory Card Image Bootable, page 4-25
• Enabling Booting from Flash Memory, page 4-26
The following information is included for reference:
• Additional Commands Associated with Flash Memory, page 4-26
• Additional Procedures Associated with Flash Memory Cards, page 4-27
SLOT 1
NORMAL
SLOT 0
MASTER
SLAVE
a
H7609
b
c
SLOT 1
NORMAL
SLOT 0
MASTER
SLAVE
SLOT 1
NORMAL
SLOT 0
MASTER
SLAVE