7-17
Cisco 7500 Series Installation and Configuration Guide
OL-5008-03 B0
Chapter 7 Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router
Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576
Step 4 Grasp the edges of the CI (as shown in Figure 7-15 for the Cisco 7513 and Cisco 7513-MX, and
Figure 7-16 for the Cisco 7576) and pull it away from the backplane, up and out from behind the chassis
panel. If necessary, gently rock the CI from side to side very slightly to dislodge its connector pins from
the backplane connector.
Figure 7-15 Removing and Replacing the Cisco 7513 and Cisco 7513-MX CI (Cutaway View)
H3099
Chassis interface
standoffs (4)
To Next Page
Loading...
