4-35
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Security Configuration Menu
The Security Configuration menu that you access directly from the Settings menu
provides information about various security settings. It also provides access to the
CTL File screen and the Trust List menu, if a CTL file is installed on the phone.
Table 4-14 describes the options on the Security Configuration menu.
Note The phone also has a Security Configuration menu that you access from the
Device Configuration menu. For information about the security options on that
menu, see the “Security Configuration Menu” section on page 4-28.
Log Server Indicates the IP address and port of the
remote logging machine to which the
phone sends log messages. These log
messages help in debugging the peer to
peer image distribution feature.
Note The remote logging setting does
not affect the sharing log
messages sent to the phone log.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Table 4-13 Network Configuration Menu Options (continued)
Option Description To Change
Table 4-14 Security Menu Settings
Option Description To Change
Web Access
Enabled
Indicates whether web access is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Security Mode Displays the security mode that is set for
the phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
To Next Page
Loading...
