Cisco 7931G - Unified IP Phone VoIP - Page 48

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-30
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
4. Add and configure directory
numbers (lines) on the phone by
completing these required fields
in the Directory Number
Configuration window.
• Directory number(s)
• Partition
• Multiple Calls and Call
Waiting
• Call Forwarding and Pickup
(if used)
• Voice Messaging (if used)
Adds primary and secondary
directory numbers and features
associated with directory
numbers to the phone.
Refer to Cisco Unified
Communications Manager
Administration Guide:
• “Cisco Unified IP Phone
Configuration” chapter
• “Directory Number
Configuration” chapter
• “Creating a Cisco Unity
Voice Mailbox” section.
See the “Telephony Features
Available for the Phone” section
on page 5-2.
5. Customize softkey templates. Adds, deletes, or changes order
of softkey features that display
on the phone.
Refer to Cisco Unified
Communications Manager
Administration Guide,
“Softkey Template
Configuration” chapter.
See the “Configuring Softkey
Templates” section on
page 5-21.
6. Configure speed-dial buttons
and assign speed-dial numbers
(optional).
Adds speed-dial buttons and
numbers.
Note Users can change
speed-dial settings on
their phones by using
Cisco Unified
Communications
Manager User Options.
Refer to Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified IP Phone
Configuration” chapter,
“Configuring Speed-Dial
Buttons” section.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phone 7931G in Cisco Unified
Communications Manager (continued)
Task Purpose For More Information