5-5
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Call forward all
loop prevention
Prevents a user from configuring a Call Forward All
destination directly on the phone that creates a Call
Forward All loop or that creates a Call Forward All chain
with more hops than the existing Forward Maximum Hop
Count service parameter allows.
For more information, see the Cisco Unified
Communications Manager System Guide,
Cisco Unified IP Phones.
Call forward
configurable
display
Allows you to specify information that appears on a phone
when a call is forwarded. This information can include the
caller name, caller number, redirected number, and
original dialed number.
For more information, see:
• Cisco Unified Communications Manager
Administration Guide.
• Cisco Unified Communications Manager
System Guide, Cisco Unified IP Phones.
Call forward all
destination
override
Allows you to override Call Forward All (CFA) in cases
where the CFA target places a call to the CFA initiator.
This allows the CFA target to reach the CFA initiator for
important calls. The override works whether the CFA
target phone number is internal or external.
Update the Configuration Reference: For more
information, see the Cisco Unified
Communications Manager System Guide,
Understanding Directory Numbers.
Call park Allows users to park (temporarily store) a call and then
retrieve the call by using another phone in the Cisco
Unified Communications Manager system.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Call Park and Directed Call
Park.
Call pickup Allows users to redirect a call that is ringing on another
phone within their pickup group to their phone.
You can configure an audio and/or visual alert for the
primary line on the phone. This alert notifies the users that
a call is ringing in their pickup group.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Call Pickup.
Call recording Allows a supervisor to record an active call. The user may
hear a recording audible alert tone during a call when it is
being recorded.
When a call is secured, the security status of the call is
displayed as a lock icon on Cisco Unified IP Phones. The
connected parties may also hear an audible alert tone that
indicates the call is secured and is being recorded.
Note When an active call is being monitored or
recorded, you can receive or place intercom calls;
however, if you place an intercom call, the active
call will be put on hold, which causes the
recording session to terminate and the monitoring
session to suspend. To resume the monitoring
session, the party whose call is being monitored
must resume the call.
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, Monitoring and
Recording.
Call waiting Indicates (and allows users to answer) an incoming call
that rings while on another call. Displays incoming call
information on the phone screen.
For more information, see the Cisco Unified
Communications System Guide,
Understanding Directory Numbers.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
