Cisco 7937G - Unified IP Conference Station VoIP Phone - Page 23

1-11
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 1 An Overview of the Conference Station
Overview of Configuring and Installing Conference Stations
4. Add and configure the directory
number on the conference station.
Adds the directory number and
features associated with the
directory number to the conference
station.
Refer to Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter,
“Directory Number Configuration” and
“Creating a Cisco Unity Voice Mailbox”
sections.
See the “Telephony Features Available for
the Conference Station” section on page 5-1.
5. Customize softkey templates. Adds, deletes, or changes order of
softkey features that display on the
user’s conference station to meet
feature usage needs.
Refer to Cisco Unified Communications
Manager Administration Guide, “Softkey
Template Configuration” chapter.
See the “Configuring Softkey Templates”
section on page 5-8.
6. Assign speed-dial numbers
(optional).
Adds speed-dial numbers.
Note Users can change speed-dial
settings on their conference
stations by using the
User
Options web pages.
Refer to:
• Cisco Unified Communications Manager
Administration Guide,
“Cisco
Unified IP Phone Configuration”
chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
7. Configure conference station
services and assign services
(optional).
Provides conference station
services.
Note Users can add or change
services on their conference
stations by using the
User
Options web pages.
Refer to Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified
IP Phone Services Configuration”
chapter.
See the “Setting Up Services” section on
page 5-8.
8. Add user information. Adds user information to the global
directory for Cisco Unified
Communications Manager.
Refer to Cisco Unified Communications
Manager Administration Guide, “Adding a
New User” chapter.
See the “Adding Users to Cisco Unified
Communications Manager” section on
page 5-9.
9. Associate a user and a user group
with a conference station.
Provides users with control over
their conference station such as
forwarding calls or adding
speed-dial numbers or services.
Note Some conference stations,
such as those in conference
rooms, do not have an
associated user.
Refer to Cisco Unified Communications
Manager Administration Guide, “Adding a
New User” chapter, “Associating Devices to
a User” section.
Table 1-4 Checklist for Configuring the Conference Station in Cisco Unified Communications Manager (continued)
Task Purpose For More Information