EasyManua.ls Logo

Cisco 7937G - Unified IP Conference Station VoIP Phone - Page 25

Cisco 7937G - Unified IP Conference Station VoIP Phone
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-13
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 1 An Overview of the Conference Station
Overview of Configuring and Installing Conference Stations
4. Configure these network settings on
the conference station by choosing
Applications > Settings >
Network
Configuration.
To enable DHCP:
a. Set DHCP Enabled to Yes .
b. To use an alternate TFTP server,
set Alternate TFTP to Yes.
c. Enter an IP address for
TFTP
Server 1.
To disable DHCP:
a. Set DHCP Enabled to No.
b. Enter a static IP address for the
conference station.
c. Enter the Subnet Mask.
d. Enter the IP address for
Default
Router 1.
e. Enter the Domain Name where
the conference station resides.
f. Set Alternate TFTP to Ye s .
g. Enter an IP address for
TFTP
Server 1.
Using DHCP—The IP address
is automatically assigned and
the conference station is
directed to a TFTP Server.
Note Consult with the
network administrator
if you need to assign
an alternative TFTP
server instead of using
the TFTP server
assigned by DHCP.
Without DHCP—You must
configure the IP address,
TFTP server, subnet mask,
domain name, and default
router locally on the
conference station.
See the “Configuring
Startup Network Settings”
section on page 3-9.
See the “Network
Configuration Menu”
section on page 4-5.
5. Set up security on the conference
station.
Provides protection against
data tampering threats and
identity theft of conference
stations.
See the “Security
Configuration Menu”
section on page 4-11.
See the “Security
Configuration Menu”
section on page 4-12.
6. Make calls with the conference
station.
Verifies that the conference
station and features work
correctly.
Refer to Cisco Unified
IP
Conference Station
7937G Phone Guide for
Cisco Unified
Communications
Manager 6.0.
7. Provide information to end users
about how to use their conference
stations and how to
configure their
conference station options.
Ensures that users have
adequate information to
successfully use their
conference stations.
See Appendix A,
“Providing Information to
Users Via a Website.
Table 1-5 Checklist for Installing the Cisco Unified IP Conference Station 7937G (continued)
Task Purpose For More Information

Table of Contents

Related product manuals