Cisco 7937G - Unified IP Conference Station VoIP Phone - Qos Configuration Menu; Security Configuration Menu

4-12
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 4 Configuring Settings on the Conference Station
Security Configuration Menu
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of service (QoS) for the
conference station.
Table 4-9 describes the menu options.
Related Topics
• Displaying a Configuration Menu, page 4-2
Security Configuration Menu
The security configuration that you access directly from the Settings menu provides information about
various security settings.
For information about how to access the Security Configuration menu, see the “Displaying a
Configuration Menu” section on page 4-2.
Note The conference station also has a Security Configuration menu that you access from the
Device
Configuration menu. For information about the security options on that menu, see the
“Security Configuration Menu” section on page 4-11.
Before you can change an option on this menu, you must unlock options as described in the
“Unlocking and Locking Options” section on page 4-3.
For information about the keys you can use to edit options, see the “Editing Values” section on page 4-3.
Ta b l e 4-9 QoS Configuration Menu Options
Option Description To Change
Layer 2 Priority (SCCP) Layer 2 priority value for conference station-based
services
Use Cisco Unified Communications
Manager Administration to modify
Layer 2 Priority (RTP) Layer 2 priority value for the RTP of a conference
station.
Use Cisco Unified Communications
Manager Administration to modify
Layer 2 Priority (TFTP) Layer 2 priority value for the TFTP of a conference
station
Use Cisco Unified Communications
Manager Administration to modify
Layer 2 Priority (DHCP) Layer 2 priority value for the DHCP of a conference
station
Use Cisco Unified Communications
Manager Administration to modify
Layer 2 Priority (DNS) Layer 2 priority value for the DNS of a conference
station
Use Cisco Unified Communications
Manager Administration to modify
Layer 2 Priority (HTTP) Layer 2 priority value for the HTTP of a conference
station
Use Cisco Unified Communications
Manager Administration to modify
DSCP For Call Control Differentiated Services Code Point (DSCP) IP
classification for call control signaling
Use Cisco Unified Communications
Manager Administration to modify
DSCP For Configuration DSCP IP classification for the configuration of a
conference station
Use Cisco Unified Communications
Manager Administration to modify
DSCP For Services DSCP IP classification for the conference station
services
Use Cisco Unified Communications
Manager Administration to modify