4-14
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 4 Configuring Settings on the Conference Station
Security Configuration Menu
Ta b l e 4-12 802.1X Authentication Status Setting
Option Description To Change
802.1X
Authentication
Status
Real-time progress of the 802.1X
authentication status, displaying one of
the following states:
• Disabled—802.1X is disabled and
the transaction was not attempted
• Disconnected—Physical link is
down or disconnected
• Connecting—Trying to discover or
acquire the authenticator
• Acquired—Authenticator acquired,
awaiting authentication to begin
• Authenticating—Authentication in
progress
• Authenticated—Authentication
successful or implicit
authentication due to timeouts
• Held—Authentication failed,
waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure