Cisco 7937G - Unified IP Conference Station VoIP Phone - Page 64

5-4
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Conference Station
Group call pickup Allows a user to answer a call ringing on a
conference station in another group by using a
group pickup code.
For more information, refer to
Cisco
Unified Communications Manager
Features and Services Guide:
Hold Allows users to move connected calls from an
active state to a held state.
Requires no configuration, unless you want to
use music on hold; see
“Music-on-hold” in
this table for information.
Immediate Divert Allows users to transfer incoming calls directly to
the voice messaging system.
For more information, refer to:
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Immediate
Divert” chapter.
Join Allows user to join two or more calls that are on
one line to create a conference call and remain on
the call.
For more information:
• See the “Configuring Softkey Templates”
section on page 5-8.
• Refer to Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter.
Malicious caller
identification (MCID)
Allows users to notify the system administrator
about suspicious calls that are received.
For more information refer to:
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Malicious
Call Identification” chapter.
Meet-Me conference Allows a user to host a Meet-Me conference in
which other participants call a predetermined
number at a scheduled time.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Meet-Me
Number/Pattern Configuration” chapter.
• Refer to Cisco Unified Communications
Manager System Guide, “Conference
Bridges” chapter.
Message waiting
indicator
An icon on the LCD screen that indicates that a
user has one or more new voice messages.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Message Waiting
Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Voice Mail Connectivity
to Cisco Unified Communications
Manager” chapter.
Table 5-1 Telephony Features for the Conference Station (continued)
Feature Description Configuration Reference