Cisco 7975G - Page 111

Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname
which maps to an IPv6 address for directories, services, messages, and information URLs. If you support
phone use of URLs, you must configure the phone and the servers that provide URL services with IPv4
addresses.
Note
The following table describes the HTTP Configuration menu options.
Table 20: HTTP Configuration Menu Options
To changeDescriptionOption
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains directory
information.
Directories URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains
Cisco Unified IP Phone
services.
Services URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the server from which
the phone obtains message
services.
Messages URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of the help text that
appears on the phone.
Information URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL that the phone uses to
validate requests made to the
phone web server.
Authentication URL
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
URL of proxy server, which
makes HTTP requests to
remote host addresses on
behalf of the phone HTTP
client and provides responses
from the remote host to the
phone HTTP client.
Proxy Server URL
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
91
Cisco Unified IP Phone Settings
HTTP Configuration Menu