2-7
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 2 Installing the Router
Note Maintain 1RU gap (both above and below) while stacking the units.
To mount the router on a rack, follow these steps:
Step 1 Attach the two brackets to the chassis using the three screws provided for each bracket. The brackets can
be attached to the router in three ways based on the needs of the user:
• Router LEDs facing the user as shown in Figure 2-5.
• I/O side facing the user as shown in Figure 2-6.
• Router I/O facing the user - Reverse the rack mount brackets to have offset rack mount option as
shown in Figure 2-7.
Figure 2-5 Attaching the Brackets (LEDs facing the user)
Figure 2-6 Attaching the Brackets(I/O side facing the user)
1 LEDs facing the user
1 Input/ Output side
To Next Page
Loading...
