Cisco 800M series - Technical Specifications; Router Specifications

A-1
Cisco 800M Series Integrated Services Router Hardware Installation Guide
APPENDIX
A
Technical Specifications
This appendix section provides specifications for the Cisco 800M Series ISRs such as router, port,
cabling specifications, and power adapters and contains the following topics:
• Router Specifications, page A-1
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Note For compliance and safety information, see Regulatory Compliance and Safety Information for
Cisco 800 Series Routers.
Router Specifications
Table A-1 lists the operational limits of the Cisco 800M Series ISR. Operating the router outside of the
limits specified is not supported. For the complete list of SKUs available for Cisco 800M Series ISRs,
see the “SKU Information” section on page 1-5.
Table A-1 Cisco 800M Series ISR Specifications
Cisco C841M-4X-JSEC/K9
ISR
Cisco C841M-4X-JAIS/K9
ISR
Cisco C841M-8X-JAIS/K9
ISR
Services and Slot Density
Embedded hardware-based
cryptography acceleration
(IPsec + SSL)
Yes Yes Yes
RJ-45 onboard LAN/WAN
10/100/1000 ports
4 (LAN) + 2 (WAN) 4 (LAN) + 2 (WAN) 8 (LAN) + 2 (WAN)
Memory (DDR3 DRAM):
Default/maximum
512 MB/512 MB 512 MB/512 MB 1GB/1GB
Flash memory (internal):
Default/maximum
2GB/2GB 2GB/2GB 2GB/2GB