Cisco 800M series - Page 42

A-2
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Appendix A Technical Specifications
External USB
flash-memory slots (Type
A)
111
Power supply External AC to DC
power-supply
External AC to DC
power-supply
External AC to DC
power-supply
Redundant-power-supply
support
No No No
Power Specifications
AC input voltage 100-240V ~ 100-240V ~ 100-240V ~
AC input frequency 50-60 Hz 50-60 Hz 50-60 Hz
AC input current range AC
power supply (maximum)
(amps)
0.16 0.16 0.16
AC input surge current 60A 60A 60A
Typical power (no
modules)
15W 15W 15W
Maximum power capacity
with AC power supply
30W 30W 30W
Safety ground-wire size AWG 14 (2.0
mm2),minimum
AWG 14 (2.0 mm2),
minimum
AWG 14 (2.0 mm2),
minimum
Wire terminal (lug) Amp/Tyco No.32957 Amp/Tyco No.32957 Amp/Tyco No.32957
DC Voltage 12V 12V 12V
DC maximum current 2.5A 2.5A 2.5A
Over-current protection 3.7A DC 3.7A DC 3.7A DC
Physical Specifications
Dimensions (H x W x D) 1.72” x 13.5” x 6.9” 1.72” x 13.5” x 6.9” 1.72” x 13.5” x 6.9”
Rack height 1RU 1RU 1RU
Rack-mount 19 in. (48.3
cm) EIA
Optional Optional Optional
Wall-mount (refer to
installation guide for
approved orientation)
Optional Optional Optional
Weight (maximum) 1.7 Kg 1.7 Kg 1.7 Kg
Airflow Natural convection Natural convection Natural convection
Environmental
Specifications
Table A-1 Cisco 800M Series ISR Specifications (continued)
Cisco C841M-4X-JSEC/K9
ISR
Cisco C841M-4X-JAIS/K9
ISR
Cisco C841M-8X-JAIS/K9
ISR