Set Up Phone Features for a Single Phone
Procedure
Step 1 Sign into Cisco Unified Communications Manager Administration as an administrator.
Step 2 Select Device > Phone
Step 3 Locate the phone associated with the user.
Step 4 Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5 Check the Override Common Settings check box for any changed fields.
Step 6 Click Save.
Step 7 Click Apply Config.
Step 8 Restart the phone.
Related Topics
Product Specific Configuration, on page 93
Product Specific Configuration
The following table describes the fields in the Product Specific Configuration Layout pane. Some fields in
this table only display in the Device > Phone page.
Table 13: Product Specific Configuration Fields
DescriptionDefaultField Type
Or Choices
Field Name
Enables, disables, or restricts access to local
configuration settings in the Settings app.
With restricted access, the Phone Settings, Bluetooth,
and Phone Information menus can be accessed. Some
settings in the Wi-Fi menu are also accessible.
With disabled access, the Settings menu does not
display any options.
EnabledDisabled
Enabled
Restricted
Settings Access
Enables or disables the ability for the phone to learn
MAC addresses from Gratuitous ARP. This capability
is required to monitor or record voice streams.
DisabledDisabled
Enabled
Gratuitous ARP
Enables or disables access to the phone web pages
through a web browser.
DisabledDisabled
Enabled
Web Access
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
93
Cisco IP Conference Phone Administration
Set Up Phone Features for a Single Phone
To Next Page
Loading...
