Cisco Aironet 1200 Series - Page 96

Chapter 3 Configuration
Routing Setup
3-58
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
New Network Route Settings
You can define additional network routes for the access point. To add a route to
the installed list, fill in the three entry fields and click Add. To remove a route
from the list, highlight the route and click Remove. The three entry fields include:
• Dest Network—Enter the IP address of the destination network.
• Gateway—Enter the IP address of the gateway used to reach the destination
network.
• Subnet Mask—Enter the subnet mask associated with the destination
network.
Installed Network Routes list
The list of installed routes provides the destination network IP address, the
gateway, and the subnet mask for each installed route.