Contents
vi
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-05
CHAPTER
7 2.4-GHz Radio Upgrade 7-1
Upgrade Overview 7-2
Unpacking the Radio 7-2
Opening the Access Cover 7-3
Removing a Blank Spacer Card 7-4
Removing a 2.4-GHz Radio 7-5
Installing a 2.4-GHz Radio 7-7
Attaching the Compliance Labels 7-9
Placing the Labels 7-10
Finding the Software Version 7-10
CHAPTER
8 5-GHz Radio Module Upgrade 8-1
Upgrade Overview 8-2
Unpacking the Radio Module 8-2
Removing the 5-GHz Radio Access Cover 8-2
Removing a 5-GHz Radio Module 8-3
Installing a 5-GHz Radio Module 8-5
Attaching the Compliance Label 8-7
Finding the Software Version 8-8
CHAPTER
9 Troubleshooting 9-1
Checking the Top Panel LEDs 9-2
Checking Basic Settings 9-4
Default IP Address Behavior 9-4
Default SSID and Radio Behavior 9-4
Enabling the Radio Interfaces 9-4
SSID 9-5
WEP Keys 9-5
Security Settings 9-5
Running the Carrier Busy Test 9-5
Running the Ping or Link Test 9-6
Resetting to the Default Configuration 9-7
Using the MODE Button 9-7
Using the Web Browser Interface 9-8
Reloading the Access Point Image 9-8
Using the MODE button 9-9
To Next Page
Loading...
