Contents
xlii
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Failover Messages 57-13
Failover System Messages 57-13
Debug Messages 57-13
SNMP 57-13
CHAPTER
58 Using the High Availability and Scalability Wizard 58-1
Information About the High Availability and Scalability Wizard 58-1
Licensing Requirements for the High Availability and Scalability Wizard 58-1
Prerequisites for the High Availability and Scalability Wizard 58-2
Guidelines and Limitations 58-2
Configuring Failover with the High Availability and Scalability Wizard 58-2
Accessing the High Availability and Scalability Wizard 58-3
Configuring Active/Active Failover with the High Availability and Scalability Wizard 58-3
Configuring Active/Standby Failover with the High Availability and Scalability Wizard 58-4
High Availability and Scalability Wizard Screens 58-5
Configuration Type 58-5
Failover Peer Connectivity and Compatibility Check 58-6
Change a Device to Multiple Mode 58-6
Security Context Configuration 58-7
Failover Link Configuration 58-7
State Link Configuration 58-7
Standby Address Configuration 58-8
Summary 58-9
Configuring VPN Cluster Load Balancing with the High Availability and Scalability Wizard 58-9
VPN Cluster Load Balancing Configuration 58-9
Feature History for the High Availability and Scalability Wizard 58-11
CHAPTER
59 Configuring Active/Standby Failover 59-1
Information About Active/Standby Failover 59-1
Active/Standby Failover Overview 59-1
Primary/Secondary Status and Active/Standby Status 59-2
Device Initialization and Configuration Synchronization 59-2
Command Replication 59-3
Failover Triggers 59-3
Failover Actions 59-4
Optional Active/Standby Failover Settings 59-5
Licensing Requirements for Active/Standby Failover 59-5
Prerequisites for Active/Standby Failover 59-5
To Next Page
Loading...
