Contents
xlv
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
CHAPTER
63 Configuring IKE, Load Balancing, and NAC 63-1
Setting IKE Parameters 63-1
Creating IKE Policies 63-4
Add/Edit IKE Policy 63-5
Assignment Policy 63-7
Address Pools 63-8
Add/Edit IP Pool 63-8
Configuring IPsec 63-9
Adding Crypto Maps 63-10
Creating an IPsec Rule/Tunnel Policy (Crypto Map) - Basic Tab 63-11
Creating IPsec Rule/Tunnel Policy (Crypto Map) - Advanced Tab 63-13
Creating IPsec Rule/Traffic Selection Tab 63-14
Pre-Fragmentation 63-16
Edit IPsec Pre-Fragmentation Policy 63-17
IPsec Transform Sets 63-18
Add/Edit Transform Set 63-18
Configuring Load Balancing 63-19
Eligible Clients 63-20
Enabling Load Balancing 63-20
Creating Virtual Clusters 63-20
Mixed Cluster Scenarios 63-21
Comparing Load Balancing to Failover 63-22
Load Balancing Prerequisites 63-23
Setting Global NAC Parameters 63-25
Configuring Network Admission Control Policies 63-26
Add/Edit Posture Validation Exception 63-29
CHAPTER
64 General VPN Setup 64-1
Client Software 64-1
Edit Client Update Entry 64-3
Default Tunnel Gateway 64-4
Group Policies 64-5
Add/Edit External Group Policy 64-6
Add AAA Server Group 64-6
Adding or Editing a Remote Access Internal Group Policy, General Attributes 64-7
Configuring the Portal for a Group Policy 64-10
Configuring Customization for a Group Policy 64-11
Adding or Editing a Site-to-Site Internal Group Policy 64-12
To Next Page
Loading...
