Cisco ASR 9000 Series Installation Guide

Figure 117: Installing the Cisco ASR 9910 Router Chassis in a 2-Post Seismic Rack
Use screw and brackets from 2 post rack mount
bracket kit.
1
Follow these steps to install the chassis in the equipment rack.
Procedure
Step 1 Using two people, lift the chassis into the rack using the side handles and grasping underneath the power
supply bays (see the figure below).
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
111
Unpacking and Installing the Chassis
Installing the Chassis in a 2-Post Rack

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model