Cisco ASR-920-20SZ-M - Unpack and Verify Shipped Contents

Unpack and Verify Shipped Contents
Procedure
Step 1 Inspect the shipping container for any shipping damage. If there is obvious physical damage, contact your
Cisco service representative, else continue with the remaining steps.
Step 2 Unpack the device.
Step 3 Inspect the device.
Step 4 Use the following table to verify the contents of the container. Do not discard the shipping container. You
will need the container in the future if you move or ship the device.
What to do next
Table 3: Default Shipping Container Contents
DescriptionComponent
Cisco ASR-920-20SZ-MDevice
One disposable wrist strap (optional)ESD, wrist strap (disposable)
Cisco ASR 920 Series Router Pointer CardDocumentation
Check the container for the following optional equipment:
• Power cord if an AC power supply is shipped.
• Lugs if a DC power supply is shipped.
If you do not specify the type of power cable, US power cable for the AC device variant
is supplied.
Note
Optional equipment
Most Cisco documentation is available online. The chassis Pointer Card that is shipped with your Cisco ASR
920 Series Router contains links and information to other online documentation.
Note
If the product is not in use, store the device in the initial packaged condition or in an ESD PE sealed bag with
silica gel.
Note
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
23
Prepare for Installation
Unpack and Verify Shipped Contents