CHAPTER 4
Install the Router
Before you begin this task, ensure that you have read and understood the safety warnings in the Standard
Warning Statements section of the Safety Warnings handout topic.
Installing the Cisco ASR-920-20SZ-M Router involves these tasks:
• Rack Compatibility, on page 25
• Set up Device on Rack or Wall, on page 27
• Ground the Device, on page 36
• Connect Power Cables, on page 37
• Connect Gigabit Ethernet Ports, on page 41
• Connect Chassis to Network, on page 44
Rack Compatibility
We recommend that you follow these rack specifications.
Rack Types
Figure 3: Rack specification EIA (19 inches and 23 inches)
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
25
To Next Page
Loading...
