Figure 5: Two Post Rack Type
Set up Device on Rack or Wall
You can choose to either set up the Cisco ASR 920 Router on a rack or wall mount it.
Rack Mount
You can choose to either set up the router in a horizontal or a vertical mounting position on the rack.
Install Rack Brackets
The device is shipped with rack mounting brackets that are to be secured on the sides of the device.
Procedure
Step 1 Remove the rack mounting brackets from the accessory kit and position them beside the device.
You can install the brackets at any of the 3 positions that are shown in the figure.
Note
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
27
Install the Router
Set up Device on Rack or Wall
To Next Page
Loading...
