Cisco ASR-920-20SZ-M - Set up Device on Rack

Figure 14: Attaching Mounting Brackets to Router for a ETSI Rack (Rear Position)
Step 2 Secure the bracket to the device with the recommended maximum torque of 10 inch-pounds (1.1 newton
meters).
Set up Device on Rack
Ensure adequate clearance when mounting the device on a rack.
Note
Install cable guides before installing the device in a 19 inches (48.3 centimeters) EIA rack.
Note
Procedure
Step 1 Position the device on the rack, and use the images as a guide to set up the device.
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
32
Install the Router
Set up Device on Rack